Connecting Closure
|
Advantage Compared with the Traditional Connector |
|
| 1. Length | The length with the same function is only 1/2 ~ 1/3 of traditional bar, which, in turn, greatly reduce the width of sewerage and the construction cost. The traditional connector does not have this function. |
| 2. 100% Watertight | The inside of pipe is precisely manufactured to ensure the compression rate of rubber ring. There shall be no worry about leakage after connection to the water. |
| 3. Quick Adjustment | Due to the use of design of bell and spigot, it is very easy for adjusting the length. There shall be no water leakage in adjusting the length even though in the presence of water pressure.¡@ |
| 4. Great Capacity for Axial Force | The design of lock block is simple in structure. The restrain function of traditional connector depends on the screw bolt with complicated structure.¡@ |
| 5. Great Capacity for Stretching | It possesses the capability for stretching and drawing to eliminate stress on the value to improve the capability of anti-vibration for pipeline. The traditional connector only has the function of drawing without stretching.¡@ |
| 6. Capacity for Deflection | It uses the design of projecting the slot of rubber ring so that the connector has the capability of deflection in small angle. The pipeline is easy for installation with improved capability of seismic resistance. The traditional connector does not have this function. |